Once the built-in system detects a toner cartridge related abnormality, it will display an appropriate warning or error message on the control LCD specifying the detected issue. The precise built-in system of your Canon Copier ImageClass MF6530 is constantly monitoring the status of all installed consumable components. If you see this error you should contact a technician. This message indicates that the machine may have some problems. To resolve this issue close the cover shown on the lower line of the LCD display. This message tells you that the cover is open. Simply remove the jammed document.Īnother common message that you will see is. Users will see on the screen when a document jam has occurred in the ADF. The message will disappear when transmission restarts. This message will appear due to the fact that the recipient is sending something and the job must wait. Is another message you may see on your LCD screen.

This message indicates that the machine is not ready to begin scanning. One the LCD screen you may see a message that says. Carefully put the paper cassette back into the machine until it clicks. Now pull out the paper cassette and push the corners of the stack under the tabs. Then check the optional paper cassette and open the left side of the optional paper cassette and remove any jammed paper and close the cover. At this point lift the transcription frame and remove the jammed paper. Then tilt the 2-sided transport guide toward the machine and remove any paper that is jammed. Next carefully remove the jammed paper from the machine. The first step is to open the left cover. If the message PAPER JAM comes up on your LCD display, first deal with the paper jammed inside the machine, then deal with the paper cassette.

Mf6530 canon transfer assembly